Menu
🏍️
Bikes
Reviews
⚖️
Compare
📚
Guides
📊
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/GASGAS/EC 250F
GASGAS EC 250F
Dirt

GASGAS EC 250F

The GASGAS EC 250F has a top speed of ~75 mph (off-road), produces ~40 hp (estimated) and weighs ~222 lbs. Motoryk rates it 8.5/10.

~40 hp (estimated)

Power

~20 lb-ft (estimated)

Torque

~222 lbs

Weight

~75 mph (off-road)

Top Speed

Naked

Body

search Inspect this bike now

Video Review

Watch Video Review

What Buyers Should Know

🏁

KTM Platform Sharing

The GASGAS EC 250F shares its platform and engine architecture with the KTM EXC-F 250, benefiting from KTM Group's extensive R&D. This results in a highly competitive and proven enduro package.

🌲

Enduro Racing Heritage

The EC 250F is purpose-built for cross-country and enduro competition, featuring a closed-course off-road design. It is not street legal in the United States.

⚙️

Advanced Electronic Package

The 2026 model features multiple engine maps, traction control, and launch control via a handlebar-mounted map switch. These electronics are tuned specifically for off-road enduro conditions.

Used Buyer Review

8.5/10
Best for
Experienced enduro riders wanting KTM quality cheaper

"A KTM 250 XC-F at a genuine discount — take it."

$4,500-$7,500 used

The EC 250F is essentially a KTM 250 XC-F wearing a red costume, which tells you most of what you need to know. Same WP suspension, same Keihin-mapped engine, same frame geometry — just cheaper on the used market because fewer people recognise the badge. That's genuinely good news for savvy buyers. The motor pulls hard from low down and screams willingly to the rev limiter, making it equally capable on tight single-track and faster enduro sections. Suspension is plush without being vague, and the bike feels planted mid-corner in a way cheaper Chinese-spec hardware simply doesn't. Buying used, check the air filter religiously — previous owners often neglect it — and inspect the exhaust header for cracks near the head. The factory maps run lean from the factory for emissions reasons, so a quick ECU flash makes a noticeable difference. Parts availability mirrors KTM exactly, which is the single biggest practical advantage over buying an equivalent Husqvarna.

Pros
Cons
Skip if: Beginners needing dealer support and hand-holding

Top 10 Accessories

Curated picks for the GASGAS EC 250F — owned, ridden, recommended.

Affiliate · we may earn

Common Problems

🔥 1 CRITICAL
⚠️Radiator leaks from mounting stress cracks MODERATE

Inspect radiator seams and coolant level before buying

Fix cost: $150-$400
⚠️Hot start difficulty, valve clearance tight MODERATE

Check valve clearance intervals in service records

Fix cost: $100-$300
🔥Subframe cracks near rear shock mount SERIOUS

Inspect subframe welds for cracks or repairs

Fix cost: $200-$600
💡Map sensor connector corrosion causing misfires MINOR

Check all wiring connectors for corrosion or damage

Fix cost: $20-$80

Pre-Purchase Checklist

Pull valve cover, check clearances
Run engine, verify clean hot start
Inspect subframe and radiator closely
Request full maintenance service records

Solid bike, maintenance-dependent, inspect valves always

Full Specifications

Engine Power ~40 hp (estimated)
Torque ~20 lb-ft (estimated)
Top Speed ~75 mph (off-road)
Weight ~222 lbs (100.7 kg)
Type Dirt
Fairing No Fairing (Naked)

More GASGAS EC 250F Guides

More from GASGAS

View all GASGAS models →

Community Reviews

Discussion

Frequently Asked Questions

What are common problems with the GASGAS EC 250F? +

Radiator leaks from mounting stress cracks: Inspect radiator seams and coolant level before buying (moderate) | Hot start difficulty, valve clearance tight: Check valve clearance intervals in service records (moderate) | Subframe cracks near rear shock mount: Inspect subframe welds for cracks or repairs (serious)

Is the GASGAS EC 250F a good motorcycle? +

A KTM 250 XC-F at a genuine discount — take it. Rating: 8.5/10. Best for: Experienced enduro riders wanting KTM quality cheaper. Avoid if: Beginners needing dealer support and hand-holding.

What is the horsepower of the GASGAS EC 250F? +

The GASGAS EC 250F produces ~40 hp (estimated), with ~20 lb-ft (estimated) of torque. Top speed: ~75 mph (off-road).

Is the GASGAS EC 250F good for beginners? +

Yes — the GASGAS EC 250F is a reasonable choice for new riders (40 hp is manageable), weighing 222 kg. Experienced enduro riders wanting KTM quality cheaper

Is the GASGAS EC 250F reliable? +

Owners report 1 critical issue to watch for on the GASGAS EC 250F, notably: Subframe cracks near rear shock mount (Inspect subframe welds for cracks or repairs). Buy with a pre-purchase inspection.

Is the GASGAS EC 250F good for daily use? +

Experienced enduro riders wanting KTM quality cheaper

How fast is the GASGAS EC 250F? +

The GASGAS EC 250F reaches a top speed of ~75 mph (off-road), producing 40 hp at 222 kg curb weight. Real-world performance depends on rider weight, gearing, and road conditions.

What is the seat height of the GASGAS EC 250F? +

The GASGAS EC 250F has a seat height of 37.4 in (950mm) — accessible to shorter riders (under 170 cm / 5'7" should manage flat-foot or near-flat-foot).

What gear should I buy for a GASGAS EC 250F? +

Motoryk has curated a Top 10 gear list specifically for the GASGAS EC 250F, covering engine oil, tires, chain, battery, and brake pads — see motoryk.com/bikes/gasgas/ec-250f/top10. Each pick is matched to this bike's spec.